Research Publications
Publications in Peer Reviewed Journals

Experimental and Theoretical Assesment of Aldol-Derived Corrosion Inhibitors in Acidic Media
Choudhary, V.; Dua, S.; Arora, N.; Prakashaiah, B. G.; Senthilkumar, T.; Ganguly, S. K.
J. Electroanal. Chem., 1013 (2026), 120130.
IF: 4.1

Pinecone-Derived Biocarbon-Polylactic Acid Composites for Sustainable 3D Printing
Arora, N.; Yadav, O.; Dua, S.; Singh, S. K.; Palla, V. C. S.; Senthilkumar, T.*
ACS Appl. Bio Mater. (2025).
IF: 4.7
Exploring p-dimethylaminocinnamaldehyde thiosemicarbazone for the surface protection of mild steel in acidic media
Dua, S.; Arora, N.; Prakashaiah, B. G.; Choudhary, V.; Senthilkumar, T.*
New J. Chem., 49 (2025), 15470.
IF: 2.5
![Corrosion inhibition of mild steel using N1,N2-bis[4-(dimethylamino)benzyl]ethane-1,2-diamine with synergistic interaction of KI](/images/publications/pub-4.jpg)
Corrosion inhibition of mild steel using N1,N2-bis[4-(dimethylamino)benzyl]ethane-1,2-diamine with synergistic interaction of KI
Dua, S.; Arora, N.; Prakashaiah, B. G.; Choudhary, V.; Kumar, P.; Senthilkumar, T.*
J. Ind. Eng. Chem. (2025).
IF: 6.0
Glycerol-Derived Polyester: Its Application in Bitumen Modification With Exploration of Monomer Synergies Using Ridge-Regularized Regression
Joshi, V.; Kumar, K.; Verma, A. K.; Kala, N.; Senthilkumar, T.*
J. Appl. Polym. Sci., 142 (37) (2025), e57452.
IF: 2.8

Modification of lower viscosity grade bitumen into higher viscosity grade bitumen via glycerol and maleic anhydride-based polyester
Joshi, V.; Kumar, K.; Verma, A. K.; Bal, R.; Kumar, U.; Senthilkumar, T.*
Int. J. Adhes. Adhes., 142 (2025), 104087.
IF: 3.5

Thiosemicarbazone derivatives as corrosion inhibitors for mild steel in 15% HCl
Dua, S.; Arora, N.; Choudhary, V.; Prakashaiah, B. G.; Saxena, R. C.; Singh, M. M.; Khan, T. S.; Thakre, G. D.; Ganguly, S. K.; Senthilkumar, T.*
Next Mat., 8 (2025), 100686.
Impact of cinnamaldehyde thiosemicarbazone on the corrosion of mild steel in 1 M and 15% HCl
Choudhary, V.; Dua, S.; Arora, N.; Saxena, R. C.; Prakashaiah, B. G.*; Senthilkumar, T.; Singh, M. M.; Khan, T. S.; Ganguly, S. K.
Discov. Chem., 2 (2025), 44.

Electrochemical Investigation of Hydroxy-Substituted Thiosemicarbazone Derivatives as an Effective Corrosion Inhibitor for Mild Steel
Choudhary, V.; Saxena, R. C.; Prakashaiah, B. G.*; Dua, S.; Arora, N.; Senthilkumar, T.; Singh, M. M.; Khan, T. S.; Ganguly, S. K.
ChemistrySelect, 10 (2025), e202405029.
IF: 2.0

Mechanical properties of novel PLA composite infused with betel nut waste biocarbon for sustainable 3D printing
Arora, N.; Dua, S.; Choudhary, V.; Singh, S. K.; Senthilkumar, T.*
Compos. Commun., 53 (2025), 102188.
IF: 7.7

A comprehensive review on fillers and mechanical properties of 3D printed polymer composites
Arora, N.; Dua, S.; Singh, V.; Singh, S. K.; Senthilkumar, T.*
Mater. Today Commun., 40 (2024), 109617.
IF: 4.5
Synthesis of polyesters derived from glycerol and phthalic anhydride and its application for bitumen modification
Joshi, V.; Kumar, K.; Krishna, K. N.; Senthilkumar, T.*
J. Appl. Polym. Sci., 141 (36) (2024), e55924.
IF: 2.8

Functionalized Polypyrrole for Mild Steel Corrosion Protection in 15% HCl
Dua, S.; Prakashaiah, B. G.; Arora, N.; Saxena, R. C.; Ganguly, S. K.; Senthilkumar, T.*
Trans. Indian Inst. Met., 77 (2024), 1313.
IF: 1.6

Conjugated polymer-based composites for anti-corrosion applications
Dua, S.; Arora, N.; Prakashaiah, B. G.; Saxena, R. C.; Ganguly, S. K.; Senthilkumar, T.*
Prog. Org. Coat., 188 (2024), 108231.
IF: 7.3
Synthesis of polycationic nanoparticles for microbial inhibition and killing
Saini, S.; Kukrety, A.; Patel, P. A.; Kumar, U.; Senthilkumar, T.*
Nanotheranostics, 7 (2023), 412.
IF: 8.25

Design, synthesis, and performance evaluation of poly(long-chain α-olefin-co-acrylates) as multifunctional additives for lubricating base oils
Kukrety, A.; Sharma, B.; Senthilkumar, T.*; Gupta, P.; Jain, S. L.
Polym. Bull., 79 (2022), 4827.
IF: 4.0
A Mini-Review on Conjugated Polymer-Based Fluorescence Probes for Bilirubin Detection
Joshi, V.; Senthilkumar, T.
Biomed. J. Sci. & Tech. Res., 44 (2022), 35244.
IF: 1.8

Oligomer Sensor Nanoarchitectonics for "Turn-On" Fluorescence Detection of Cholesterol at the Nanomolar Level
Joshi, V.; Hussain, S.; Dua, S.; Arora, N.; Mir, S. H.; Rydzek, G.; Senthilkumar, T.*
Molecules, 27 (2022), 2856.
IF: 4.6
Efficient solution polymerization of vinyl monomers using iron nanoparticle grafted carbon nano-granules
Verma, A.; Saini, S.; Sharma, B.; Ali, A.; Senthilkumar, T.; Kumar, U.*
J. Polym. Res., 29 (2022), 514.
IF: 2.8
Turn-On Fluorescence Sensing of Bilirubin Using Water-Soluble Conjugated Polymer
Senthilkumar, T.*; Joshi, V.; Dua, S.; Arora, N.; Kukreti, A.
Int. J. Anal. Appl. Chem., 7 (2021), 13.

Förster Resonance Energy Transfer Mediated Rapid and Synergistic Discrimination of Bacteria over Fungi Using a Cationic Conjugated Glycopolymer
Hussain, S.; Lv, F.*; Qi, R.; Senthilkumar, T.; Zhao, H.; Chen, Y.; Liu, L.; Wang, S.
ACS Appl. Bio Mater., 3 (2020), 20.
IF: 4.7

Conjugated Polymer Nanogel Binding Anticancer Drug through Hydrogen Bonds for Sustainable Drug Delivery
Senthilkumar, T.; Lv, F.*; Zhao, H.; Liu, L.; Wang, S.
ACS Appl. Bio Mater., 2 (2019), 6012–6020.
IF: 4.7

Conjugated Polymer Nanoparticles with Appended Photo-Responsive Units for Controlled Drug Delivery, Release, and Imaging
Senthilkumar, T.; Zhou, L.; Gu, Q.; Liu, L.; Lv, F.; Wang, S.
Angew. Chem. Int. Ed., 57 (2018), 13114.
IF: 16.9
Orientation effect induced selective chelation of Fe2+ to a glutamic acid appended conjugated polymer for sensing and live cell imaging
Senthilkumar, T.; Parekh, N.; Nikam, S. B.; Asha, S. K.*
J. Mater. Chem. B, 4 (2016), 299.
IF: 5.7

Selective and Sensitive Sensing of Free Bilirubin in Human Serum Using Water-Soluble Polyfluorene as Fluorescent Probe
Senthilkumar, T.; Asha, S. K.*
Macromolecules, 48 (2015), 3449.
IF: 5.2
An easy 'Filter-and-Separate' method for enantioselective separation and chiral sensing of substrates using a biomimetic homochiral polymer
Senthilkumar, T.; Asha, S. K.*
Chem. Commun., 51 (2015), 8931–8934.
IF: 4.2
Self-assembly in tailor-made polyfluorenes: synergistic effect of porous spherical morphology and FRET for visual sensing of bilirubin
Senthilkumar, T.; Asha, S. K.*
Macromolecules, 46 (2013), 2159.
IF: 5.2
Book Chapters
Arora, N.; Dua, S.; Purohit, S. V.; Dash, B.; Yadav, M. D.; Jena, B. K.; Senthilkumar, T.
Polymer Composites: From Computational to Experimental Aspects. Materials Horizons: From Nature to Nanomaterials, Springer, 2024, pp. 1–41
Arora, N.; Dua, S.; Senthil Kumar, T.
Handbook of 3D Printing in Biomedical Applications, Taylor & Francis Group, 2025, pp. 269–283
Senthilkumar, T.; Wang, S.
Conjugated Polymers for Biological and Biomedical Applications, Wiley-VCH Verlag GmbH & Co. KGaA, 2018, pp. N/A
Arora, N.; Dua, S.; Senthilkumar, T.*
3D Printing in Materials Engineering, Elsevier, 2026, pp. N/A
